Sealer

75-58 Heat Sealer TS-12

TS-12 เป็นเครื่องปิดผนึกโดยใช้ความร้อนที่แน่นที่สุด ซึ่งเหมาะอย่างยิ่งสำหรับการปิดผนึกด้วยความร้อนในห้องปฏิบัติการ เครื่องปิดผนึกความร้อน 75-58 Heat Sealer TS-12 ถูกออกแบบมาเพื่อผลิตซีลจีบแบบอุ่น สำหรับวัสดุบรรจุภัณฑ์ที่มีความยืดหยุ่น  เครื่องปิดผนึกด้วยความร้อน 75-58 Heat Sealer TS-12 เป็นแบบดิจิตอล ที่ช่วยให้สามารถควบคุมอุณหภูมิซีลบนและล่างได้อย่างอิสระ และควบคุมอุณหภูมิได้ตลอดความยาวของซีล

Heat Sealer TS-12 for Lab and Shop

The TS-12 is one of the most precise and consistent table top sealers available, perfect for laboratory heat sealing applications. The heat sealer is designed to produce heated crimp seals for flexible packaging materials. The digitally controlled heat sealer allows independent upper and lower seal jaw temperature and accurately controls the temperature across the entire length of seal.

The seal pressure is changed by simply adjusting the analog gauge which controls the cylinder pressure. The TS-12 ensures sealing consistency for each sample and allows for seal testing, sample package development or small production sealing.

Standard Features

• Digitally controlled temperature
• Digitally controlled dwell time
• Independent upper and lower sealing temperatures
• Footswitch
• Safety guards and switches for safe operation
• Maintenance hardware
• Film Tray
• Auto Cycle switch allows continuous cycling of sealing jaws for quick sample sealing. This feature helps reduce
  operator fatigue by eliminating the need to use the foot switch for each seal especially in high volume lab testing applications.

Optional Features

• Quick-Change Seal Jaw Inserts with any seal pattern up to 30.4 cm long (12 in.) (The Quick-Change Seal Jaw
  Inserts allow the operator to change the sealing pattern in a matter of minutes without having to change
  heaters or wiring)
• Many insert materials and coatings are available
• Phenolic seal jaw tray

Specifications

Sealing Temperature
Range: Ambient - 200 °C (392 °F)
Resolution: ± 0.1 °C (0.18 °F)
Measuring Accuracy: ± 2.0 °C (3.6 °F)
Control Band: ± 0.2 °C (0.36 °F)

Sealing Pressure
Range: 68.9 kPa-1275 kPa (10 psi-185 psi)
Control Accuracy: Analog Gauge
Resolution: 13.8 kPa (2 psi)

Sealing Dwell Time
Range: 0.20 to 99.9 s
Control Accuracy: ± 0.025 ms
Resolution: 10 ms

Sealing Jaw Options
Length: 30.4 cm (12 in) Maximum
Width: 5 - 25.4 mm (0.197 - 1.00 in)
Seal Surface: Flat, Vertical, Horizontal, Custom or Standard Geometry (*All jaws designed for quick & easy changeover)
Machine Control: Digital & Analog Controls

Machine Requirements
Power: 110V to 240V 50/60 Hz, 1000 VA
Air (clean, dry): 621-827 kPa (90psi - 120psi ) 621 kPA (90 psi) recommended.  Minimum pressure switch is built in.

Physical Specifications
WxDxH: 50.8 cm x 22.8 cm x 27.9 cm (20 in x 9 in x 11 in)
Weight: 22.6 kg (50 lbs. )